How does a pool vacuum cleaner work?
If you recently got your hands on a pool vacuum cleaner and want to know how does a pool vacuum cleaner work, then you are in right place. Using a pool vacuum cleaner will be a piece of cake for you after reading this post. We also have reviews about best vacuum pool cleaners.
First, we are going to give you a basic idea of how does a pool vacuum cleaner work. Then there is a step-by-step guide for using it. In the end, we have got some efficient pool cleaning tips and tricks to save your time.
Let us first give you a simple idea of the functioning of a pool vacuum cleaner.
So how does a pool vacuum cleaner work
A pool vacuum cleaner works by combining with the filtration system of your pool. As you may have observed, the filtration system alone cannot keep your pool clean. It only filters the water and floating elements that come in its contact.
However, the dirt, debris, and algae settle on your pool floor, and don’t get up. Therefore, your filtration system is unable to take them out.
Here comes the play of a pool vacuum cleaner. It combines with the suction line of your filtration system through a hose and gives the filtration system an approach to the sneaking debris on the pool floor. You can read about pool cleaning with vacuum.
This debris is sucked through the hose of the pool vacuum cleaner and the filtration system takes care of the rest.
Components needed for a Pool Vacuum Cleaner
To use a pool vacuum cleaner, you must have the following items.
- A vacuum head (vinyl or fiberglass depending upon the type of your pool)
- A vacuum hose
- A telescopic pole
- A skim vac (Optional)
In addition, keep in mind that vacuum head for pools having vinyl liner is different from fiberglass or concrete pools. The vacuum heads for the vinyl liner pool have brushes underneath them which keep them from tearing or misplacing the vinyl lining.
On the other hand, vacuum heads for fiberglass or concrete have wheels. They cannot be used for vinyl liner pools otherwise the vinyl sheet will be damaged.
How to use a pool vacuum cleaner
You can clean both above-ground and in-ground pools using a pool vacuum cleaner. We have reviews on pool cleaners about above ground pool. To get a spotless pool floor by using a pool vacuum cleaner, you should follow the steps mentioned below.
Step 1: Get the components in one place.
It is easy for you to assemble the components if they are in one place. Furthermore, make sure the hose is well managed and coiled otherwise the things can get messy.
Step 2: Join the Vacuum Head and Telescopic Rod
For this, you just need to give a little push to the rod by placing it right on the slot on the head. It should fit fine with a strong connection.
Besides, you can also en-lengthen the telescopic rod for easier use and handling.
Step 3: Join the Vacuum Head and Vacuum Hose
Usually, one end of the hose can swivel and the other cannot. Although they might not be of different colors, but you can check by rotating them.
Connect the swiveling end of the vacuum hose to the vacuum head. As a result, the vacuum hose will not be tangled when you will clean the pool.
Step 4: Fill the hose with water
The pump in the pool filtration systems will suck the water from the pool using the vacuum hose. But the air in the hose can damage the pump. Therefore, it is necessary to fill the hose with water to protect the pump from damage.
You can fill the hose by using two methods. First, you can put the vacuum head in the water and feed the hose straight into it. In this way, water can flow into it freely. After that, when the other end of the hose reaches just above the pool water level, water should come out of the hose.
Second, you can fill the hose by placing its one end over one of the jets in the pool. The jet pressure will fill the hose automatically. You will know that hose is full when bubbles stop appearing on the other end. Hence, this method is faster than the previous one.
Step 5: Connect the Vacuum Hose to Filter System
You need to connect the hose to the filter system for the pool vacuum cleaner to work.
To do this, first, take the basket out of your skimmer. You’ll see one or two holes of the same size as your hose in the skimmer base. One of these holes is sucking water and you can check it by cautiously placing your finger near the hole.
Now, connect the hose end to the suction hole carefully. And make sure you cap the end of the hose so that no water runs out and no air enters it. Push the hose end into the skimmer hole and it’ll connect.
Thus, the filter pump should be sucking water through the vacuum hose and vacuum head of your pool vacuum cleaner.
Step 6: Use the Telescopic Rod to clean the Pool
As you have completely set up the pool vacuum cleaner now, it’s time to clean the pool. You can move the vacuum head on the pool floor by using the telescopic rod. The vacuum head sucks the debris under it and sends it to the filtration system.
Clean every inch of the pool by moving the vacuum head on it. Although this process is time taking depending on the size of your pool, but you’ll like the result: A shiny pool with a neat floor.
Step 7: Disconnect the Pool Vacuum Cleaner and backwash the Filter
After you have done cleaning, separate the components in the same order you joined them.
The filter will be full of debris after you have cleaned your pool by using a pool vacuum cleaner. You need to backwash it for normal working of the filtration system of the pool.
Things to take care about when Cleaning the Pool
When you are cleaning a pool using a pool vacuum cleaner, you should take care of the following things.
1- Choose the Right Vacuum Head
As described earlier, there are two types of vacuum head: Vinyl Vacuum head and Fiberglass or Concrete vacuum head. For efficient work and safety of your pool, you should choose wisely between the two depending on your pool type.
2- Make sure the connections are rigid
You need to connect the vacuum head to the telescopic rod and vacuum hose. Make sure that these connections are not loose. Otherwise, your pool vacuum cleaner can get damaged, or the components may fall in the pool during cleaning which can be a mess.
Also, the connections should be correct. You should connect the swiveling end of the vacuum hose to the vacuum head.
3- Keep the Telescopic Rod in control
Sometimes, the telescopic rod can fall in the pool while you are managing other things so take care of it.
Also, make sure you enlengthen it so it can reach the pool floor easily and you don’t have to bend yourself.
Tips and Tricks for Pool Cleaning
Since now you know how does a pool vacuum cleaner work, you can optimize your work by keeping in mind these cool tips and tricks.
- Move the vacuum head slowly and steadily to capture all the debris. Otherwise, the dirt will move away and remain in the pool
- You can also scrub the walls by using swiveling end of the telescopic rod and vacuum head.
- Always start from the shallow end and move towards the deep end of the pool.
- Try to move in a pattern while cleaning the pool. In this way, you won’t have to clean a part twice.
FAQs: How does a pool vacuum cleaner work
You can vacuum above ground pool by using a pool vacuum cleaner with a filtration system of the pool.
- Assemble the components of a pool vacuum cleaner.
- Fill the vacuum hose with water.
- Attach the hose with the suction hole in the skimmer.
- Now vacuum the above-ground pool slowly until all the debris is cleared.
A manual pool vacuum can be used by connecting it to the pool filtration system. The suction pump of the filter is connected to the hose of the vacuum.
You can do it in this way:
- Join all the components of a pool vacuum cleaner.
- Fill the hose with water and make sure no air is left in it.
- Now attach this vacuum hose with the suction pipe in the skimmer of your pool.
- Now, the vacuum head can suck all the debris from your pool floor.
In this way, you can use a manual pool vacuum to clean your pool.
A pool vacuum is turned on by turning on the suction of your filter pump.
It is because the vacuum hose of the pool vacuum is connected to the suction hole of the skimmer. This suction hole is connected to the filter pump.
So, you need to turn on the filter pump to turn on the pool vacuum.
The above ground pool vacuums work by connecting to the filtration system of the pool.
The vacuum hose of the pool vacuum is connected to the suction hole of the skimmer and the pool vacuum can vacuum all the debris from the pool floor.
You can vacuum above ground pool with sand filter as follows.
- Clear all the large leaves or debris that you can with the pool net.
- Join all the components of the pool vacuum cleaner together.
- Fill the vacuum hose with water and make sure no air is left in it.
- Attach the vacuum hose with the suction hole present at the base of the pool skimmer.
You can now vacuum the pool using the telescopic rod.
- Move the vacuum head slowly and clear all the debris.
- After vacuuming, disconnect the vacuum hose from the skimmer.
- Agitate the water so that it can go through the filtration system.
To vacuum above ground pool with cartridge filter, you need to connect the pool vacuum cleaner with the pool filtration system.
Follow these steps.
- Join all the components of the pool vacuum cleaner.
- Fill the vacuum hose with water. Also, make sure you fill it, so no air is left.
- Connect the vacuum hose to the suction hole in the skimmer.
- Turn on the filter pump and vacuum all the debris in your above ground pool.
- After vacuuming, disconnect the vacuum hose and agitate the water so it is passed through the cartridge filter.
Finally, you know in detail how does a pool vacuum cleaner work. With our guide and helpful tips for cleaning your pool, you can get the work done in lesser time than before.
However, if you just want to enjoy your pool on a beautiful sunny day without the hard work of cleaning it, you can look for an automatic pool cleaner too. Using its mapping technology, an automatic pool cleaner work on its own to clean your pool completely.